Is there a noticeable difference between CL16 and CL18?
The latency at 3200Mhz and 3600Mhz is the same. While 3600Mhz processes slightly more instructions with CL18 but takes a little bit longer, 3200Mhz takes a little bit less time but processes fewer instructions. Therefore, the CL16 is superior to the CL18 if speed is your only concern.
Is CL18 latency good?
It's generally the most important part of the latency when looking at RAM. You want that number to be as low as possible. DDR4 3600 with a CAS latency of 18 isn't all that great. Typically, that would be 16 in any decent quality RAM, and DDR4 3600 C16 is good RAM.
Is 3200Mhz CL16 same as 3600MHz CL18?
The latency of 3200MHz CL16 and 3600MHz CL18 is the same (both have a CAS Latency of 10ns) but the higher frequency of the 3600MHz RAM would give it the advantage.
What is the latency timing of CL16 vs CL18?
CL16 at 3200 MT/s is 10 nanoseconds CAS latency. CL18 at 3800 MT/s is not quite 9.5 ns CAS latency. The latter would be preferable assuming it's stable, which I gather it isn't really. Note that CL18 at 3600 MT/s is also 10 ns CAS latency.
Is there a big difference between 3600 CL16 and 3600 CL18?
I've seen a particular Youtube video that benchmarks 3600 mhz CL18 vs 3600 mhz CL16, and it appears to show a great improvement in 1% lows when using CL16, with negligible differences in the maximum framerate.
Can I mix CL18 with CL16?
You can mix speeds, but it's not recommended. As another said the system will try to run your memory at the speed of the slowest RAM.
Is 3600MHz worth it over 3200?
Now, will you notice a difference between 3200MHz and 3600MHz? Most likely, nope. Unless you're doing real geeky stuff like heavy-duty gaming, 3D modeling, or running mega intense software, going from 3200MHz to 3600MHz isn't gonna give you that much of a boost.
Is 22 ms latency good?
A good ping speed typically ranges between 10-20ms for professional gamers. Although a perfectly average ping for gaming is around 20-50ms. It's important to consider that the lower your ping, the faster your connection and the more competitively you can play.
Is 44 ms latency good?
Low latency means less lag and smoother gameplay. Generally, when you test your ping, an acceptable number is anywhere around 40 to 60 milliseconds (ms) or lower, while a speed of over 100 ms will usually mean a noticeable lag in gaming.
Is CL18 RAM slow?
CL18 by itself doesn't mean anything, you need the RAM speed number too in order to calculate the actual latency. 2133CL18 is pretty slow (16 ns), 4400CL18 would be very low latency for DDR4 (around 8 ns). Typical latency is 10 ns and that's entirely fine for any of today's CPU's, Intel or AMD.
How much better is 3600 than 3200?
In a conclusion, there is not much difference for gaming to pay for something, which is faster than 3200 MHz. But the synthetic tests for computation work were better at 3600 MHz after tightening up timings, so it could be worth extra bucks.
Is 3600 cl16 better than 3200 cl16?
3600 cl16 will be better unless you overclock. 3200 cl16 will run about as good as 3600 cl18.
Is CL 16 18 18 good?
The smaller the time ratio is the better the RAM is. It's just that simple. So in your case CL16–18–18 is better than CL16–20–20. CL16-18-18 provides better performance.
Which CL latency is better?
When the memory frequency is the same, the lower the CL, the shorter the latency time will be, and the less time the computer has to wait to read the memory data, which means the better the performance. Under the same CL, the effect of different frequencies on the latency time.
What CL is best for RAM?
When choosing RAM, look for modules with lower CL ratings, such as CL16 or CL15. Dual-channel configuration: If your motherboard supports dual-channel memory, make sure to install RAM modules in pairs to take advantage of the increased bandwidth and performance benefits.
What is the difference between 3000 CL16 and 3200 CL18?
3200 MHz CL18, or 3000 MHz CL16. Pricing is close enough to not be a consideration. The 3000 MHz will have a latency of 10.66 nanoseconds, whereas the 3200 MHz will have a latency of 11.25 nanoseconds. There is no denying that the 3000 MHz will be lower latency, but the 3200 MHz will be operating at a higher speed.
Is higher CAS latency better?
Generally, lower CAS latency and higher frequency result in better performance, but these factors also tend to increase the cost of the memory module. If you're building a gaming or video editing PC and want to maximize performance, a memory module with a low CAS latency and high frequency may be a good choice.
Is 3200 or 3600 RAM better for Ryzen 3600?
The RAM speed for the optimized performance for the Ryzen 3000 series processors or "Sweet Spot" is 3600Mhz. So in that respect you have a good RAM speed for your Ryzen 3600 processor.
Is it OK to use RAM with different CAS latency?
Mixing memory in a computer build is never the appropriate thing to do unless you are strapped financially and cannot afford to purchase a new set of the same memory you already have installed. If your memory passes the test and stability checks then you will be fine running the memory at the lower latencies.
Can you mix 16GB RAM with 32GB RAM?
Can you mix 32GB and 16GB RAM? Depends on what you mean by “mix” and what kind of memory slots your motherboard has. If it's a dual-channel memory (which most are these days), then you can have 2 sticks that equal 32 gb (i.e. 2 sticks with 16 gb each) AND 2 sticks that equal 16 gb (2 sticks with 8 gb each).
Can you have 2 16GB and 2 32GB RAM?
Yes, you can do that but keep in mind that the speed that all RAM sticks will follow is 2666mhz speed. Honestly, it is better using the 2 16gb RAM sticks since you will have 32gb of RAM by then and you can utilize the max speed of the RAM.
Is 32 GB RAM overkill?
As for 32GB of RAM, it can be considered overkill for gaming alone. However, if you are also running other resource-intensive programs alongside your games, such as streaming or video editing software, having that much RAM can help ensure that your computer can handle the workload without slowing down.
Is 32GB 3200MHz RAM good for gaming?
For gamers, the Crucial 32GB RAM is a dream come true. I noticed a substantial improvement in frame rates and reduced stuttering in demanding games. The increased memory capacity seemed to have a direct impact on the smoothness of gameplay, delivering an immersive experience without any hiccups.
Can 5600X run 3600MHz RAM?
Will 3600 MHz RAM be supportable in Ryzen 5 5600X? - Quora. Yes Ryzen 5600x will support 3600MHz.
Is 600 a bad ping?
Ping of 100ms or higher is considered too high for online gaming because, at this level of high latency, noticeable lag starts becoming problematic. Although many factors contribute to ping times, most broadband connections offer a ping of less than 100ms, and may even enable optimal ping levels of less than 50ms.
Is 0 packet loss good?
In general, a packet loss rate of less than 1% or 0.1% is considered to be acceptable for most applications. However, some applications such as online gaming, real-time communication, or VoIP may require even lower packet loss rates to ensure smooth and uninterrupted performance.
Is 30ms latency ok?
Under 20 ms: Your ping is ideal and your game almost lag-free. 20 to 50 ms: You should be able to play mostly undisturbed. 50 to 100 ms: A noticeable disadvantage in the response time can arise in fast online games. 100 to 150 ms: Noticeable delays can be expected in all online games.
Is 7 ms ping good?
A good ping speed for gamers is approximately 40ms – 60ms. With toob you can expect to see your ping anywhere between 3 – 6 milliseconds (that's way lower than average!). You can use tools like speedtest.net to test your ping and make sure it's within an acceptable range.
Is a ping of 7 good?
Ping amounts of 100 ms and below are average for most broadband connections. In gaming, any amounts below a ping of 20 ms are considered exceptional and “low ping,” amounts between 50 ms and 100 ms range from very good to average, while a ping of 150 ms or more is less desirable and deemed “high ping.”
Is 100 packet loss bad?
Packet lost is when parts of the request/acknowledgment/etc are lost in transit. 100% packet loss means that the signal from the Xbox is just disappearing on the way, which is unlikely, it's probably being terminated due to a system failure on the Xbox Server side causing this issue.
Is CL18 latency good?
It's generally the most important part of the latency when looking at RAM. You want that number to be as low as possible. DDR4 3600 with a CAS latency of 18 isn't all that great. Typically, that would be 16 in any decent quality RAM, and DDR4 3600 C16 is good RAM.
Is 16gb 3600MHz RAM enough?
Well, that depends on what you are doing. If you are gaming on a Ryzen CPU (or even an intel CPU) then the 3600MHz will be far more important. If you are doing large workstation tasks like complex video editing then the 32GB of RAM will be very useful.
Can RAM be too slow?
Slower RAM will cause bottleneck in your system as the CPU has to wait for the RAM to fetch the contents from the secondary memory to feed the cpu.
Does RAM affect FPS?
During gameplay, if your PC glitches and response times are slow, you may need to add more memory. Having more than enough memory for the titles you want to play is recommended for any gamer who wants to improve their gaming experience. RAM will boost your system's responsiveness and improve frame rates.
Is 16GB 3200MHz good for gaming?
The 3200 MHz speed is perfect for gaming and multitasking, ensuring smooth and lag-free gameplay. These RAM sticks have never let me down when it comes to providing the necessary performance boost for my gaming needs.
Does CL latency matter?
The latency paradox
Because CL ratings indicate only the total number of clock cycles, they don't have anything to do with the duration of each clock cycle, and thus, they shouldn't be extrapolated as the sole indicator of latency performance.
Is there a big difference between 3600 CL16 and 3600 CL18?
I've seen a particular Youtube video that benchmarks 3600 mhz CL18 vs 3600 mhz CL16, and it appears to show a great improvement in 1% lows when using CL16, with negligible differences in the maximum framerate.
Is CL18 3600 faster than CL16 3200?
3600 CL18 has CAS latency of (1 / 1800) * 18 = 0.01 us or 10ns. 3200 CL16 is also 10ns. But 3600 is just a tiny bit faster cause it transfers data at 3600 instead of 3200 or cca 12%.
Which is better CL16 3200mhz or CL18 3600mhz?
Out of the two choices of memory (3200mhz CL16 and 3600 CL18) the recommended choice would be the 3600mhz CL18 kit. Ryzen 3rd generation CPUs do prefer higher bandwidth memory, such as the 3600MHz. However, one thing that would be an even better third option is a kit of 3600mhz CL16 RAM.
Can I mix CL 16 and CL 18 RAM?
A: You can mix speeds, but it's not recommended. As another said the system will try to run your memory at the speed of the slowest RAM.
What CL is best for gaming?
The Silicon Power Value Gaming DDR4 16GB (8GBx2) 3200MHz CL16 RAM kit is an excellent budget-oriented option for gamers and enthusiasts on a tight budget.
Does CL matter for DDR5?
Most DDR5 modules have CL40 CAS latency, which negates DDR5's high clock speeds. It's faster at completing tasks, but it takes longer for the RAM to register it needs to perform a task. So, that DDR4-3200 CL20 RAM will have snappier performance than a DDR5-4800 CL40 module. The situation is improving for DDR5.
Is lower CL better for gaming?
When the memory frequency is the same, the lower the CL, the shorter the latency time will be, and the less time the computer has to wait to read the memory data, which means the better the performance. Under the same CL, the effect of different frequencies on the latency time.
Is CL latency lower better?
CL being lower is slightly better, lower latency is always good, but it is only one part of the whole chain of events of copying data from RAM.
Is MHz or CL more important?
The higher the speed, and the lower the CL, the better the overall performance. So, the money you've saved from not purchasing that larger capacity RAM kit should be used on the best performing RAM right?
How much better is 3600 than 3200?
In a conclusion, there is not much difference for gaming to pay for something, which is faster than 3200 MHz. But the synthetic tests for computation work were better at 3600 MHz after tightening up timings, so it could be worth extra bucks.
Does 3200 vs 3600 matter?
Now, will you notice a difference between 3200MHz and 3600MHz? Most likely, nope. Unless you're doing real geeky stuff like heavy-duty gaming, 3D modeling, or running mega intense software, going from 3200MHz to 3600MHz isn't gonna give you that much of a boost.
Is 3600 CL16 better than 3200 CL16?
3600 cl16 will be better unless you overclock. 3200 cl16 will run about as good as 3600 cl18.
Is it OK to use RAM with different CAS latency?
Mixing memory in a computer build is never the appropriate thing to do unless you are strapped financially and cannot afford to purchase a new set of the same memory you already have installed. If your memory passes the test and stability checks then you will be fine running the memory at the lower latencies.
Which CL is best for RAM?
When choosing RAM, look for modules with lower CL ratings, such as CL16 or CL15. Dual-channel configuration: If your motherboard supports dual-channel memory, make sure to install RAM modules in pairs to take advantage of the increased bandwidth and performance benefits.
Is it OK to mix 3200 and 3600 RAM?
You can technically mix ram, however in a best case scenario it will default to the lowest settings of the installed ram (so if one is 3200 and one is 3600 it will go 3200 for example). There's still the chance of it causing issues due to the subtle differences between manufacturers etc though.
Will 3600 RAM run at 3200?
A320 motherboards support memory overclocking up to DDR4–320 and A520 motherboards have unlocked memory overclocking. So even though you have bought 2 x 3600 Mhz the main RAM sticks, you will run at 3200 Mhz if you put them onto motherboards that can support up to 3200 Mhz.
Which has better CAS latency CL16 or CL18?
The latency at 3200Mhz and 3600Mhz is the same. While 3600Mhz processes slightly more instructions with CL18 but takes a little bit longer, 3200Mhz takes a little bit less time but processes fewer instructions. Therefore, the CL16 is superior to the CL18 if speed is your only concern.
Does RAM CL need to match?
The CL number is the latency of the ram stick. You should usually get the same latency as the original memory. If the motherboard can accept faster memory, then consider getting that if your needs warrant it. The new ram has to be compatible with your motherboard.
What is the difference between 3000 CL16 and 3200 CL18?
Is 32GB 3200mhz RAM good for gaming?
Is CL 16 18 18 good?
Is 48 GB RAM overkill?
Does RAM CL make a difference?
Is 48 GB RAM ok?
Is CL22 faster than CL16?